A bad LED bulb can be fixed by spending Rs 10.
The branded company’s LED bulb can also be good by spending a few rupees.
If the company’s kit is installed in the LED bulb, the work will be done at a cost of 35-40 rupees.
LED lights are used in almost all homes. Compared to the old yellow bulb, it consumes much less electricity. Earlier where a single 100W-180W bulb used to come in, now an 18-20W LED bulb lights up the largest room. But these LEDs are quite expensive, and in case of damage, buying a new one costs 100-150 rupees. But did you know that a bad LED bulb can be fixed by spending 10 rupees. If 5 bulbs are installed in the house, then you will have to spend Rs 50 only to fix it, whereas if you buy 5 new LED bulbs, you will have to spend Rs 500 for that.
Yes, the branded company’s LED bulb can be fixed. After speaking to an electrician who works in the LED light industry, he found that each bulb had an assembly attached to it. If there is a 9W bulb, then the 9W array remains, if there is a 7W bulb, the 7W array is connected to it, and only the 7W PCB remains in it. With several watts of light remaining, a bulb of the same wattage is installed in the PCB.
Also Read This- How Much Gas Is Left In An LPG Cylinder Known With A Wet Cloth, This Trick Is Amazing
How do electricians fix light bulbs?
For example, if a 9-watt bulb is faulty, the electrician first checks it by making a connection and mounting it on the bracket. If the bulb does not burn, the PCB bulb is checked by winding the tape on the tweezers. All lamps fitted are checked one by one.
Suppose that out of 9 bulbs, 8 did not burn out and when you put them on the 9th, they burn out, then understand that the bulb has fused. The lamp that is captured is removed from the heating shoulder, and a new one is installed. If the lamp is removed and a new one installed, the work will be done for 20-25 rupees.
Also Read This – Gadar Creates Rebellion! The OnePlus 5G just got so cheap, the deal makes everyone buy it!
On the other hand, if the bulb is fine, the assembly may be faulty, which is why the PCB must be changed. It costs 10 rupees to install a local kit, and if the company kit is installed, then work will cost 35-40 rupees.
How long will the lamp last when it is repaired?
If a good company kit is installed, once it’s addressed, it’s been running smoothly for a year. If instead of installing a new lamp, it is fixed by applying a nail, there is less hope of long life.
Tags: technology newsAnd Technology news in hindi
First published: January 16, 2023, 13:53 GMT
Check the latest tech news here.